Codes of conduct and certification
Eureka's graphic
Where the text says it
- Article 40(1)
The Member States, the supervisory authorities, the Board and the Commission shall encourage the drawing up of codes of conduct intended to contribute to the proper application of this Regulation, taking account of the specific features of the various processing sectors and the specific needs of micro, small and medium-sized enterprises.
- Article 40(2)
Associations and other bodies representing categories of controllers or processors may prepare codes of conduct, or amend or extend such codes, for the purpose of specifying the application of this Regulation
- Article 40(5)
Associations and other bodies referred to in paragraph 2 of this Article which intend to prepare a code of conduct or to amend or extend an existing code shall submit the draft code, amendment or extension to the supervisory authority which is competent pursuant to Article 55. The supervisory authority shall provide an opinion on whether the draft code, amendment or extension complies with this Regulation and shall approve that draft code, amendment or extension if it finds that it provides sufficient appropriate safeguards.
- Article 40(7)
Where a draft code of conduct relates to processing activities in several Member States, the supervisory authority which is competent pursuant to Article 55 shall, before approving the draft code, amendment or extension, submit it in the procedure referred to in Article 63 to the Board
- Article 40(9)
The Commission may, by way of implementing acts, decide that the approved code of conduct, amendment or extension submitted to it pursuant to paragraph 8 of this Article have general validity within the Union.
- Article 40(4)
A code of conduct referred to in paragraph 2 of this Article shall contain mechanisms which enable the body referred to in Article 41(1) to carry out the mandatory monitoring of compliance with its provisions by the controllers or processors which undertake to apply it
- Article 41(1)
the monitoring of compliance with a code of conduct pursuant to Article 40 may be carried out by a body which has an appropriate level of expertise in relation to the subject-matter of the code and is accredited for that purpose by the competent supervisory authority.
- Article 41(6)
This Article shall not apply to processing carried out by public authorities and bodies.
- Article 42(1)
The Member States, the supervisory authorities, the Board and the Commission shall encourage, in particular at Union level, the establishment of data protection certification mechanisms and of data protection seals and marks, for the purpose of demonstrating compliance with this Regulation of processing operations by controllers and processors. The specific needs of micro, small and medium-sized enterprises shall be taken into account.
- Article 42(3)
The certification shall be voluntary and available via a process that is transparent.
- Article 42(4)
A certification pursuant to this Article does not reduce the responsibility of the controller or the processor for compliance with this Regulation and is without prejudice to the tasks and powers of the supervisory authorities which are competent pursuant to Article 55 or 56.
- Article 42(5)
A certification pursuant to this Article shall be issued by the certification bodies referred to in Article 43 or by the competent supervisory authority, on the basis of criteria approved by that competent supervisory authority pursuant to Article 58(3) or by the Board pursuant to Article 63. Where the criteria are approved by the Board, this may result in a common certification, the European Data Protection Seal.
- Article 42(7)
Certification shall be issued to a controller or processor for a maximum period of three years and may be renewed, under the same conditions, provided that the relevant criteria continue to be met. Certification shall be withdrawn, as applicable, by the certification bodies referred to in Article 43 or by the competent supervisory authority where the criteria for the certification are not or are no longer met.
- Article 43(1)
Member States shall ensure that those certification bodies are accredited by one or both of the following
- Article 43(1)(a)
the supervisory authority which is competent pursuant to Article 55 or 56
- Article 43(1)(b)
the national accreditation body named in accordance with Regulation (EC) No 765/2008 of the European Parliament and of the Council
- Article 43(4)
The accreditation shall be issued for a maximum period of five years and may be renewed on the same conditions provided that the certification body meets the requirements set out in this Article.
- Article 32(3)
Adherence to an approved code of conduct as referred to in Article 40 or an approved certification mechanism as referred to in Article 42 may be used as an element by which to demonstrate compliance with the requirements set out in paragraph 1 of this Article.